Convectionbaking - Electrolux EW30GS65GS2 Use & Care Manual

Table of Contents

Advertisement

Cooki
Modes
CONVECTION B AKING
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
Convection
Bake
Air Flow
This mode of cooking enables you to obtain the best
culinary results when baking with multiple pans and
racks. Multiple rack baking may slightly increase cook
time for some foods but the overall result is time saved.
Most foods cooked in a standard oven will cook faster
and more evenly with Convection Bake. Convection
baking uses the hidden bake element,
the hidden
convection element and a fan to circulate the oven's
heat evenly and continuously
within the oven. The
temperature probe can be used in this cooking mode.
The oven can be programmed for Convection baking at
any temperature between 300°F to 550°F with a default
temperature of 350°F.
Convection Baking Tips:
o Always preheat your oven before using the Convection Bake mode.
o If your recipe cooking temperature
has already been converted for convection baking
there is no need to reduce your oven temperature.
If your recipe has not had the
temperature
converted
for convection
baking you can easily reduce the temperature
using the Convection
Convert feature. Please see Convection Convert section on next
page for further instruction on temperature
conversion.
• Use tested recipes with times adjusted for convection baking when using this mode. With
single rack convection baking some foods may have as much as a 25% reduction in cook
time; check food at minimum time. Time reductions will vary depending on the amount
and type of food to be cooked.
o When using Convection
Bake with a single rack, place oven rack in position 3 or 4. If
cooking on multiple racks, place the oven racks in positions 2 and 6 or 1,4 and 7.
o Most bakeries (except cakes) should be baked on pans with no sides or very low sides to
allow heated air to circulate around the food.
• Food baked on pans with a dark finish will cook faster.
To set a Convection Bake Temperature of 350°F:
1.
Arrange interior oven racks.
2.
Select oven by pressing UPPER OVEN u....
OVEN"
3.
Press CONVECTION
BAKE [].
4.
Press START <_. The oven display shows PRE=HEATING.
5.
Place food in the oven when the chime signals and temperature display shows that the
oven has reached the set target temperature and the PRE-HEATING message disappear.
6.
The Temperature
Probe, Cook Time, Timer, End Time and Rapid Preheat features can
be set to control your cooking time (read their sections for directions).
7.
Remove food. Always use oven mitts when removing hot pans from the oven.
8.
Press CANCEL @ to stop or cancel the Convection Bake feature at any time.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents