Electrolux EW30GS65GS2 Use & Care Manual page 10

Feature Overview
OVEN SUPPORTS & OVEN VENTS
m [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Installing Oven Rack Supports
ALWAYS INSTALL OVEN RACK
SUPPORT BEFORE TURNING ON
THE OVEN (WHEN THE OVEN IS
COOL).
To install oven rack support, insert
the supports by pushing them downward
into the two brackets on each side of the
oven interior, as shown below.
To remove the oven rack support for
a self-clean cycle, pull up the support to
disengage them from the brackets. If
the rack supports are not removed, the
self-clean cycle won't start.
Oven Rack Positions
This oven is equipped with ladder rack supports with 7
positions to accomodate precisely every mode of
cooking.
Rack positions
;NON-SLIDING
RACK ONLY)
Oven Vent Location
The oven is vented above each door. When
the oven is on, warm air is released through
the vents. This venting is necessary for proper
air circulation in the oven and good baking
results.
Oven Vent
Warm Air