Table of Contents
Advertisement
Setting Oven Controls
SE ING SILENTCONTROL OPERATION
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
The_
or ()-,) and"-" c,_:) or (_
pads control the Silent Control operation feature. The Silent
v
Control operation feature allows the oven control to be operated without sounds or beeps
whenever necessary. If desired the control can be programmed for silent operation and later
returned to operating with all the normal sounds and beeps.
To change control from normal sound operation to silent control
operation:
1.
To tell if your range is set for normal or silent operation press and hold _
or
Q
for 7 seconds. "0:00" will
in the
1
appear
display (Figure
).
2.
After 7 seconds, the display will show either ":SP" (Figure 2) or ":--" (Figure 3).
Press _
or(_
to switch between normal sound operation and silent
operation mode.
If ":SP" appears (Figure 2), the control will operate with normal sounds and
beeps. If ":- -" appears (Figure 3), the control is in the silent operation mode.
or Q
to accept the change or press @ or @
to reject the change.
3.
Press
Figure 1
ADJUSTING OVENTEMPERATURE
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
The temperature in the oven has been pre-set at the factory. When first using the
oven, be sure to follow recipe times and temperatures.
If you think the oven is too
hot or too cool, the temperature in the oven can be adjusted. Before adjusting, test
a recipe by using a temperature
setting that is higher or lower than the
recommended temperature. The baking results should help you to decide how much
of an adjustment is needed.
To adjust the oven temperature:
1.
Press G
or @
for 8 seconds (Figure 4). After 8 seconds the offset digit will
appear in the display (Figure 5).
2.
To increase the temperature use the number pads to enter the desired change.
(Example 30°F) Q
G
(Figure 6). The temperature may be increased as
much as 35°F (19°C). To decrease the temperature use the number pads to
enter the desired change. (Example -30°F) Q
Q
and then Press _
or
1_
(Figure 7). The temperature may be decreased as much as 35°F (19°C).
3.
Press (_)o,,,, or Q
to accept the temperature change and the display will return to
the time of day (Figure 8). Press _)o_o_
or@
to reject the change if necessary.
Figure 2
Figure 3
[]
[]
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Hide quick links:
Advertisement
Table of Contents
