Advertisement
Available languages
Available languages
2. Dress properly.
Do not wear loose clothing or jewelry. Contain long
hair. Keep your hair, clothing, and gloves away from moving parts. Loose
clothes, jewelry or long hair can be caught in moving parts.
3. Avoid accidental
starting. Be sure switch is off before plugging
in.
Carrying tools with your finger on the switch or plugging in tools that have
the switch on invites accidents.
4. Remove adjusting keys or wrenches before turning the tool on. A
wrench or a key that is left attached to a rotating part of the tool may result
in personal injury.
5. Do not overreach.
Keep proper footing
and balance at all times.
Proper footing and balance enables better control of the tool in
unexpected situations.
6. Use safety equipment.
Always wear eye protection.
Dust mask,
non-skid safety shoes, hard hat or hearing protection must be used for
appropriate conditions.
TOOLUSE
AND CARE
1. Use clamps or other practical
way to secure and support the
workpiece to a stable platform. Holding the work by hand or against
your body is unstable and may lead to loss of control.
2. Do not force tool. Use the correct tool for your application.
The
correct tool will do the job better and safer at the rate in which it is
designed.
3. Do not use tool if switch does not turn it on or off. Any tool that cannot
be controlled with the switch is dangerous and must be repaired.
4. Disconnect
the plug from the power source before making
any adjustments,
changing
accessories,
or storing the tool.
Such preventive safety measures reduce the risk of starting the tool
accidentally.
5. Store idle tools out of reach of children
and other untrained
persons.
Tools are dangerous in the hands of untrained users.
6. Maintain tools with care. Keep cutting
ACCESSORIES
sharp and
clean. Properly maintained tools, with sharp cutting edges are less likely
to bind and are easier to control.
7. Check for misalignment
or binding of moving parts, breakage of
parts, and any other condition
that may affect the tools operation.
If damaged, have the tool serviced before using. Many accidents are
caused by poorly maintained tools.
8. Use only accessories
that are recommended
by the manufacturer
for your model. Accessories that may be suitable for one tool, may
become hazardous when used on another tool or model.
5
Advertisement
