1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Saw
  5. 118.22320
  6. Operator's manual

Craftsman 118.22320 Operator's Manual

7-in. tile wet saw
Hide thumbs
Table of Contents

Advertisement

Quick Links

Operator's Manual
I CRAFTSMAN°J
7-in. TILE WET SAW
Model No.
118.22320
Z_CAUTION:
Read, understand and follow
all Safety Rules and Operating Instructions in
this manual before using this product.
• SAFETY
• OPERATION
• MAINTENANCE
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

Advertisement

Table of Contents
loading

Related Manuals for Craftsman 118.22320

Summary of Contents for Craftsman 118.22320

  • Page 1 Operator's Manual I CRAFTSMAN°J 7-in. TILE WET SAW Model No. 118.22320 Z_CAUTION: Read, understand and follow • SAFETY • OPERATION all Safety Rules and Operating Instructions in • MAINTENANCE this manual before using this product. Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

  • Page 2: One Year Full Warranty

    ONE YEAR FULL WARRANTY ON CRAFTSMAN TOOL If this Craftsman Tool fails to give complete satisfaction within one year from the date of purchase, RETURN IT TO THE NEAREST SEARS STORE OR SEARS PARTS AND REPAIR CENTER IN THE UNITED STATES, and Sears will repair it, free of charge.

  • Page 3: Work Area Safety

    WARNING: BE SURE to read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. WORKAREA SAFETY 1. ALWAYS keep your work area clean and well lit. Cluttered and dark areas invite accidents.
  • Page 4 TOOL USE AND CARE SAFETY WARNING: BE SURE to read and understand all instructions before operating this saw. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. 1. ALWAYS use a splash hood in every operation in which it can be used. 2.

  • Page 5: Electrical Safety

    ELECTRICAL SAFETY IMPORTANT" We recommend using a GFCI (Ground Fault Circuit Interrupter) protected receptacle because the blade of this saw is used in close proximity to water. 1. This tile saw is equipped with a 3-prong electrical plug. DO NOT alter the plug or use a 2-prong receptacle.

  • Page 6: Extension Cords

    EXTENSIONCORDS ALWAYS periodicallyinspect tool cord and extension cords for damage. Have damaged tool cord repaired at a Sears Service Center. Discard damaged extension cords. BE SURE to stay constantly aware of the cord location and keep it well away from the moving blade. ALWAYS use the proper extension cord, and MAKE SURE the cord is in good condition.
  • Page 7 GROUNDING INSTRUCTIONS (See Figure 1) cont. This tool is intended for use in an Fig'1 Coverer outlet resembling (A) in Figure I below. II Grounded A temporary adapter resembling (B) _.__--_ Outlet Box \Groundin in Figure 1 may be used to connect it to a 2-pole receptacle, if a properly °...
  • Page 8 SERVICE SAFETY cont. / ,WARNING: Some dust particles created by power sanding, sawing, grinding, drilling and other construction jobs contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. •...
  • Page 9 Before attemptingto use any tool, be sure to familiarize yourselfwith all the operating features and safety instructions. Z_ WARNING: Remember that a careless fraction of a second is sufficient to cause severe injury, DO NOT let familiarity with your saw make you careless. KNOW YOUR SAW (See Fig.
  • Page 10 UNPACKING 1. Remove all packing materials from around your saw. 2. Carefully lift the saw from carton and place it on a level work surface, 3. Do not discard the packing materials until you have carefully inspected the saw for loose or damaged parts.

  • Page 11: Before Starting

    INSTALLING THE RIP FENCE (Figure 6) 1. Place rip fence on the top of the cutting table and clamp both ends. NOTE: The rip fence can be placed on either the left or right side. INSTALLING THE MITER GUIDE (Figure 7) 1.

  • Page 12: Making Miter Cuts

    1'O START THE SAW (Figure 9) 1. Remove cord from compartment under the saw and connect it to a GFCl (Ground Fault Circuit interrupter) protected outlet. 2. Push On/Off switch to the "On" position, IMPORTANT: ALWAYS let the blade cut at its own speed.
  • Page 13 I/k, WARNING: power source BEFORE cleaning or performing any maintenance. To avoid accidents, ALWAYS disconnect the tool from the All parts represent an important part of the double insulation system and should be serviced only at a Sears Service Center. Avoid using solvents when cleaning plastic parts.
  • Page 14 TILE SAW- MODEL NUMBER118.22320 The Model Number will be found on the Nameplate. Always mentionthe Model Number in all correspondenceregardingyour tool. oty. PaNs No. Part Description 22320-1 Blade Guard Set (w/Screw, Wing Nut, Washer & Guard Support) 22320-2 Miter Guide Set (w/Adiustment Knob &...
  • Page 15 --14 • _15...
  • Page 16 Your Home For repair in your home of all major brand appliances, lawn and garden equipment, or heating and coolingsystem, no matter who made it, no matter who sold It! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and the items like garage door openers and water heaters.

Table of Contents