1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Saw
  5. 118.22000
  6. Operator's manual

Craftsman 118.22000 Operator's Manual

7-in. tile wet saw with laser trac
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operator's Manual
I;RRFTSMRN+I
7-in. Tile Wet Saw
with LASER TRAC
TM
Model No.
118.22000
A
z-_CAUTION:
Read, understand and follow
all Safety Rules and Operating Instructions in
this Manual before using this product.
• WARRANTY
• SAFETY
• ASSEMBLY
• OPERATION
• MAINTENANCE
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Visit our Craftsman web site: www.sears.com/craftsman
1-19-06

Advertisement

Table of Contents
loading

Related Manuals for Craftsman 118.22000

Summary of Contents for Craftsman 118.22000

  • Page 1 Read, understand and follow all Safety Rules and Operating Instructions in this Manual before using this product. Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. Visit our Craftsman web site: www.sears.com/craftsman • WARRANTY • SAFETY • ASSEMBLY • OPERATION •...

  • Page 2: One Year Full Warranty

    We recommend a Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shield, available at Sears Stores or other Craftsman Outlets. DO NOT by themselves "WARNING" 2-2-06...
  • Page 3 WORK AREA SAFETY 1. Keep your work area clean and well lit. DO NOT leave tools or tile pieces on on the saw while it is in operation. Cluttered work benches and dark areas invite accidents. 2. DO NOT operate...
  • Page 4 Fault Circuit Interrupter) protected receptacle since the blade of this saw is used in close proximity to water. This tool is equipped with an electrical cord having a 3-prong electrical plug (Fig. 1-A). DO NOT alter the plug or use in a 2-prong receptacle. DO NOT modify the plug provided.
  • Page 5 3. KEEP your body positioned to either side of the saw blade and not in direct line with the saw blade. 4. LET the blade reach full speed before beginning the cut.
  • Page 6 8. NEVER cut more than one tile at a time. 9. KEEP the saw table free of clutter with the exception of the tile you are cutting. 10. MAKE SURE that the work piece that will be cut off has enough room to move sideways.
  • Page 7 KNOW YOUR SAW (Fig. 3) Your tile wet saw has a precision-built electric motor and it should only be connected to a 120-volt, 60Hz AC ONLY power supply (normal household currant). DO NOT operate on direct current (DC). The large voltage drop would cause a loss of power and the motor would overheat.

  • Page 8: Loose Parts List

    4. Lay tool on a level surface (Fig. 4). 5. To release saw table legs, pull out hook from latch and attach to peg on table base (fig. 5 and fig. 6). Grab and pull the single padded table handle on one end of tile saw and lift to unfold the first set of legs (Fig.7).

  • Page 9: Installing The Blade

    RIP/MITER GUIDE INSTALLATION 1. To install the rip/miter guide, slide aluminum arm of rip/miter guide into the groove in the fence on saw table (Fig 21). 2. The rip miter/guide can be made stationary by tightening the screw and butterfly knob located on the arm of the rip/miter guide.
  • Page 10 90 angle to the fence. Tighten knob to keep guide in position. 3. Make a cut line on the tile. Turn on the laser. Place tile on saw table. Line up the cut mark with the laser (Fig. 27).

  • Page 11: Pump Maintenance

    4. Your tile wet saw has been equipped with a set of wheels for easy transporting. They are to be used when the legs of the saw table are in the closed, or folded up position. To use wheels, simply pull out and down on the black handle located on the wheels' axle (Fig.

  • Page 12: Replacing The Pump

    Center. To locate a Sears Parts and Repair Store near you, call the 800 number located on the back of this manual. 1. Remove the water tray from the saw table. Remove pump from housing in water tray. Set tray aside. Loosen knob on black cover box under saw table (Fig. 35).
  • Page 13 _O__ oooooo OOOOOOOO oooooo OOOOOOOO oooooo OOOOOOOO • 0;0; __< __*_= © >- ° C_ W 03 03 •_- T _, TTTT ooo o OOOO OJ O OOOO CO O OOOO OJ OJ oJ oJ oJ oJ _z-_ OJ OJ oJ oJ 0J 0J "6...
  • Page 14 NOTES NOTES...
  • Page 15 Your Home For repair-in your home-of lawn and garden equipment, or heating no matter who made it, no matter For the replacement parts, accessories owner's manuals that you need to do-it-yourself. For Sears professional installation and items like garage door openers 1-800-4-MY-HOME Call anytime, day or night (U.S.A.

Table of Contents