Briggs & Stratton Engine - 22 Hp - Dixon SPEEDZTR 44/965981001 Operator's Manual

MAINTENANCE
Briggs & Stratton Engine - 22 HP
1. Loosen screws and remove air filter cover.
2. Remove the filter cartridge by pulling upwards
along the outside edge.
WARNING!
The engine and the exhaust system
become very hot during operation.
Risk for burns if touched.
Allow engine and exhaust system to
cool at least two (2) minutes.
Loosen cover screws
8009-406
3. Remove the foam filter (precleaner). Clean
the foam filter with mild detergent and water.
Squeeze dry in a clean cloth. Do not oil the
foam sleeve.
4. Tap the paper filter against a fixed surface to
remove dust. If the paper filter is still dirty, it
must be replaced.
5. Wipe clean the inside of air filter housing.
6. Refit the foam filter (pre filter).
IMPORTANT INFORMATION
Do not use compressed air to clean the air
filter.
Do not wash the paper filter.
Do not oil the paper filter.
/
Remove filter
8019-014
7. Mount the filter in the air filter housing.
8. Replace the cover over the air filter housing
and secure with screws.
IMPORTANT INFORMATION
Operating the engine with loose or damaged
air cleaner components could allow unfiltered
air into the engine causing premature wear
and failure.
Reinstall filter
8019-015
DIXON-43