Changing The Engine Oil - Dixon ZTR 4423 Operator's Manual

CARE AND MAINTENANCE
CAUTION

CHANGING THE ENGINE OIL:

1.
2.
3.
4.
NOTE: Refer to engine manufacturer's recommendations
Hex Head Valve Stem
34
HOT oil may cause burns. Allow
engine to cool before draining oil.
The "Dapco" oil drain valve is located on the left
side of the engine crankcase.
Place a suitable container under the drain valve.
The fitting of a short piece of hose will help direct
the oil.
To drain, turn hex head valve stem counter--
clockwise with 10mm wrench or socket. Open
to full open (approximately 7 turns).
After engine is drained, tighten hex stem.
for frequency of oil changes.