Briggs & Stratton Engine - 19 Hp - Dixon SPEEDZTR 44/965981001 Operator's Manual

MAINTENANCE
Briggs & Stratton Engine - 19 HP
1. Pull up the handle on the air filter cover.
Unhook and turn towards the engine to
remove.
2. Clean the area around the filter element to
prevent debris from getting into the engine
when the element is removed.
WARNING!
The engine and the exhaust system
become very hot during operation.
Risk for burns if touched.
Allow engine and exhaust system to
cool at least two (2) minutes.
Pull up on handle
8009-406
,
Lift out the filter element. Replace a dirty, bent
or damaged element with a new one. Handle
the new element carefully and do not use if the
sealing surfaces are bent or damaged. If the
element can be reused, tap it against a solid
surface to remove dust.
IMPORTANT INFORMATION
Do not use compressed air to clean the air filter.
Filter should be assembled dry and not be oiled.
Remove air filter element
8009-409
DIXON-41