Trouble Shooting - Craftsman 113.234680 Owner's Manual

8 1/4-1nch compound miter saw
Table of Contents

Advertisement

PROBLEM
Brake does not stop
blade within six
(6) seconds.
TROUBLE
SHOOTING
GUIDE - MOTOR
PROBABLE CAUSE
1. Brushes not seated
or lightly sticking.
2.
Motor brake winding--
overheated from use of not-
recommended accessory
or rapid on/off cycling.
3. Arbor screw loose.
4. Other.
Motor does not start.
1. Fuse.
2. Brushes worn.
3. Other.
Brush sparking when
1. Normal--automatic
brake
switch released,
working properly.
SUGGESTED CORRECTIVE ACTION
--Inspect/clean/replace
brushes
(see maintenance section).
--Use a recommended
blade.
--Let cool down,
--Retighten
--Authorized
service. See instructions under circuit
diagram.
--15-Amp
time delay fuse, or CKT. breaker.
--See "Maintenance," page
--Authorized service,
TROUBLE
SHOOTING
GUIDE - GENERAL
PROBLEM
PROBABLE CAUSE
SUGGESTED CORRECTIVE ACTION
Blade hits table.
1. Misalignment.
--See Assembly and Alignment, pages 10-14.
2. Damaged depth stop.
--Get authorized Sears Service.
Angle of cut
1. Misalignment.
--See Assembly and Alignment, pages 10-14.
not accurate,
Can't move
1. Fence clamps still
--Loosen
fence clamps. Retighten before starting
miter adjustment,
tight,
next cut.
2. Sawdust under table.
--Vacuum or blow out dust.
WEAR EYE PROTECTION
Power-head
1. Loose pivot points.
--See Assembly and Alignment, Step 4, pages 11-12.
wobbles.
Power-head
won't fully rise.
Blade binds, jams,
burns wood.
Tool vibrates or
shakes.
1. Pivot misadjustment.
2. Part failure.
3. Pivot spring not replaced
properly after service.
1. Improper operation.
2. Dull blade.
3. Improper blade
4. Warped
blade.
1. Saw blade
not round.
2. Saw blade damaged.
3. Saw blade loose.
4. Other.
-See
Assembly and Alignment, Step 4, pages 11-12.
-Get
authorized Sears Service.
--Get authorized Sears Service.
-See
Basic Saw Operation, pages 18-21.
--Replace
or sharpen blade.
--Replace with 81/4 " diameter blade designed
for the material being cut.
-- Replace blade.
-- Replace blade.
-- Replace blade.
--Tighten
arbor screw.
--Get authorized Sears Service.
23

Advertisement

Table of Contents
loading

Table of Contents