Advertisement
Compound
Cut
When
a compound
cut is required,
select
the correct
bevel
and miter position.
Move with the handle
to the
miter angle to make the cut
if the fence
is in the rear
position,
loosen
the two lock handles
before changing
the miter angle
Cutting Bowed Material
Before cutting a workpiece, check to make sure it is
not bowed. If it is bowed the workpiece
must be
positioned and cut as illustrated. Do not position work-
piece incorrectly or try to cut the workpiece without the
support of the fence. This will cause pinching of the
workpiece on the blade. The workpiece could suddenly
jump or move and your hand could hit the blade.
CORRECT
INCORRECT
20
Advertisement
