Oki C9800hdn Printing Manual page 61

4
4-5 Using Fiery Downloader or Fiery WebDownloader
All Known Formats lists all files in formats supported by Fiery Downloader.
You can download files and fonts in the same batch. If the fonts are used by files in the
same batch, the fonts download first.
5. Choose the Connection Type (Windows) or Queue (Mac OS) to which you will download
the files.
The options available to you in this menu depend on the setup at your site. The
potential selections are Print Queue (Windows) or Print (Mac OS), Hold Queue
(Windows) or Hold (Mac OS), and Direct Connection (Windows) or Direct (Mac OS).
If your administrator has not enabled one or more of these connections, you cannot
select it.
You cannot print PDF or TIFF files with the Direct connection. If you choose the
Direct connection, the job is spooled to the Print queue and then printed. If the Print
queue is not enabled, the job is spooled to the Hold queue and must be released for
printing by the operator.
To download fonts, you must use the Direct connection (make sure the
N :
OTE
Direct connection is published on the Fiery). If you do not have access to the Direct
connection, you must embed any special fonts used by the file in the file when you
generate it.
6. Select the file name and click Add File(s) (Windows) or Add (Mac OS).
The File name field (Windows) displays the name of the selected file before you
click Add.
You can navigate to different drives and directories to select files to download.
Click Add All (Mac OS) to add all files in a folder.
To select multiple sequential files (Windows), select the first file and then Shift-click
the last file. Control-click to select multiple non-sequential files.
If you change your mind about a file, select the file name in the Files to Download list
and click Remove File(s) (Windows) or Remove (Mac OS).
Click Remove All (Mac OS) to remove all files from the Files to Download list.