Oki C9800hdn Printing Manual page 113

A
A-7 Print Options
Option and settings
(default setting is underlined)
Image Mode
Standard/Best
Image Smoothing
Printer's default/Automatic/Off/On/
Below 90 ppi/Below 150 ppi/
Below 200 ppi/Below 300 ppi
Instructions
Job PIN
Media Type
Plain Paper/Transparency/Labels/
Recycled/Rough/Glossy/Bond/
Cardstock/Letterhead
Media Weight
Printer Setting/Light/
Medium Light/Medium/Medium Heavy
Heavy/Ultra Heavy 1/Ultra Heavy 2/
Ultra Heavy 3
Mixed Media
No/ (define mixed media)
Notes 1
Description
Specify the image quality for your job.
Select On to minimize grainy output
when printing low-resolution images.
When you select On, image smoothing
will be enforced on all images.
Select Automatic if you want to use
smoothing only when it makes a visible
difference. When the image is below 150
ppi, image smoothing will be applied
automatically.
Select Below 90 ppi, Below 150 ppi,
Below 200 ppi, or Below 300 ppi to apply
image smoothing to those images whose
effective resolution is below the specified
ppi value that you choose.
Enter instructions for the operator about
the job.
Enter the PIN for a secure print job (if
you have set Destination to Secure Print).
Specify the media type to use for the
entire job.
Specify the weight of the media for the
job.
Click Define to specify media types for
specific pages.
Enter information about the job.
Requirements, constraints,
and information
The Printer's default setting reflects the
setting specified in Fiery Setup.
If you create an EPS file in Photoshop,
the settings specified from Photoshop
take effect.
Select Transparency if you will be
printing on transparencies. The
Transparency setting is only supported
with the Manual Feed tray.
For more information, see page
The Notes 1 field has a 32-character
limit.
A-14.