Oki C9800hdn Printing Manual page 122

A
A-16 Print Options
4. Enter a starting page number for each chapter in the Chapter start field if your job
consists of multiple chapters and is printed duplex.
Defining Chapter start guarantees an even number of pages to be printed in each
chapter. It is recommended to use this field when you print a duplex multi-chapter
document. Separate the page numbers by commas. For example, if the chapters in a
4-chapter document start on pages 1, 2, 34, and 56, enter 1,2,34,56.
Enter all chapter starting page numbers, separated by commas. Your entry in the
N :
OTE
Chapter start field applies to the entire document regardless of the Page Ranges you
specify in the Define Mixed Media area.
5. For each page range, enter the page numbers and specify the options for that range.
You can choose your specifications from the following options:
—Enter a page number or the range of page numbers. Use a hyphen to
Page Range
define a range of sequential pages. For example, 1-3 prints the first three pages on a
particular media type. The range -14 prints the first 14 pages; 5- prints Page 5 through
the end of the document. If all the pages in multiple ranges use the same media type,
you can combine ranges with a comma; for example, 4-5, 9-10.
You can insert a blank page by entering ^. For example, entering ^6 into the Page
Range option inserts a blank page before page 6.
You cannot combine a single page with page ranges.
N :
OTE
—Select a type of media you want to use for the range.
Media Type
Paper Source
media type must be assigned to a tray at the C9800 control panel.
Document Default represents the setting you make outside the Mixed Media
N :
OTE
dialog box. For example, if you set Paper Source to Tray 1 under the Paper Source
print option bar, Document Default for Paper Source in the Mixed Media dialog box is
equal to Tray 1.
2 sided printing
print on both sides of the paper.
Media Weight
—Select a paper tray with a media you want to use for the range. The
—Select Long Edge Binding or Short Edge Binding if you want to
—Select a weight that is appropriate for the media type.