Paper Exits; Face-Down Stacker (Top Exit); Face-Up Stacker (Rear Exit); Duplex Unit (If Installed) - Oki C910 User Manual

Paper Exits

Face-down Stacker (Top Exit)

The face-down stacker on the top of the printer can hold up to 500
sheets of 20 lb (75 g/m²) standard paper, and can handle paper
stocks from 17 – 57 lb (64 – 216 g/m²). Pages printed in reading
order (page 1 first) will be sorted in reading order (last page on
top, facing down).

Face-up Stacker (Rear Exit)

The face-up stacker should be opened and the tray extension
pulled out when required for use. (With the face-up stacker either
open or closed, the driver setting of Face Down will successfully
direct prints to the Face-Down stacker.)
The face-up stacker can hold up to 200 sheets of 20 lb (80 g/m²)
standard paper and can handle stocks up to 73 lb (330 g/m²).
Always use this stacker and the multi-purpose feeder for paper
stocks heavier than 57 lb (216 g/m²).

Duplex Unit (if installed)

This option provides automatic two-sided printing on plain paper
fed from Tray 1, optional tras 2– 5, or the MP Tray. Applicable
paper sizes are A6, A5, B5, B5LEF, Executive, A4, A4LEF, Letter,
LetterLEF, Legal 13 in, Legal 13.5 in, Legal 14 in, B4, Tabloid,
Tabloid Extra, A3, A3 Wide, A3 Nobi, Custom size (3.9 – 12.9 in
wide, 5.8 –18 in long), using paper stocks in the range 20 – 32 lb
(75 – 120 g/m²).

Loading Trays 1 to 5

Tray 1 is used in the following example.
1. Pull out the tray.
19
– C910 Paper Recommendations