Network Printer Ip Address Configuration - Oki C711WT Network Manual

C711wt network guide

Hide thumbs Also See for C711WT:

Table of Contents

ETWORK PRINTER

Use the Standard Set-up Utility to configure the IP Address, Subnet Mask and Gateway.

NOTE

It will not be necessary for printers connected to a network using DCHP to use

this setup method.

Some steps may not display depending on the network protocols installed.

Connect the machine to the network and turn on.

Insert the CD-ROM into the CD-ROM drive. The Setup Utility starts automatically. If

it does not start, double-click \setup.exe (in the root directory) on the

CD-ROM.

Select the appropriate language.

Navigate to and select Network Software.

Select the Install Network Card Setup Utility link.

Select your language.

Select Oki Device Quick Setup and follow the on-screen instructions.

Select the appropriate network card, using the Ethernet address to identify it, and

click Next.

The Ethernet Address (MAC address) is displayed on the configuration map, refer to

"Configuration settings" on page

ADDRESS CONFIGURATION

Printing from windows > 33

Table of Contents

Show Quick Links

Table of Contents