Oki C711WT Network Manual page 15

ITEM
RPRINTER
Setup
Printer Name
EtherTalk Tab
This allows you to configure EtherTalk related items.
ITEM
Use EtherTalk
Protocol
Printer Name
Zone Name
EXPLANATION
Available if you select
RPRINTER mode in
Operation Mode.
By selecting the RPRINTER
button, this is displayed:
Here you can specify print servers
to which the printer can be
connected.
Time Out
Set the NetWare printer object name.
EXPLANATION
Set EtherTalk protocol to enabled/disabled.
Set EtherTalk Printer object name.
Set the zone name to which the printer belongs.
Network configuration > 15
xxxxx
xxxxx
Set duration from the last data's
arrival to freeing of the port in
seconds.