Setting The System Option Modes - HP XP20000/XP24000 Configuration Manual

CAUTION:
to HP-UX hosts. Do not select a mode other than 08 for HP-UX. Changing a host mode after the
host has been connected is disruptive and requires the server to be rebooted.
When a new host group is added, additional host group modes (options) can be configured. The
storage administrator must verify if an additional host group mode is required for the host group.
The following host group modes (options) are available for HP-UX:
Table 1 Host group modes (options) HP-UX
Host
Group
Mode Function
12 Deletion of Ghost LUN
33 Task retry ID enable
CAUTION:
configured is disruptive and requires the server to be rebooted.

Setting the system option modes

The HP service representative sets the system option mode(s) based on the operating system and
software configuration of the host. Notify your HP representative if you install storage agnostic
software (such as backup or cluster software) that might require specific settings.
16 HP-UX
The correct host mode must be set for all new installations (newly connected ports)
Changing host group modes for ports where servers are already installed and
Default Comments
Inactive Previously MODE280
Inactive HP-UX 1 1.31 only