HP XP20000/XP24000 Configuration Manual page 123
Hp storageworks xp disk array configuration guide (t5278-96047, may 2011)
Hide thumbs
Also See for XP20000/XP24000:
- Manual (448 pages) ,
- Reference manual (372 pages) ,
- User manual (151 pages)
Table of Contents
Advertisement
6.
Right-click the domU that was placed in maintenance mode and select Exit Maintenance Mode.
7.
Open a command line interface to the dom0 and edit the /etc/multipath-enable.conf
file with the appropriate array.
NOTE:
HP recommends that you use the RHEL 5.x device mapper config file and multipathing
parameter settings on HP.com. Use only the array-specific settings, and not the
multipath.conf file bundle into the device mapper kit. All array host modes for Citrix
XenServer are the same as Linux.
8.
Enter the following command to scan the LUNs that are connected to the arrays: xe sr-probe
type=lvmhba
Configuring disk array devices 123
Advertisement
Table of Contents
