Setting The System Option Modes - HP XP1024 System Configuration Manual

Setting the System Option Modes

The HP service representative sets the System Option Mode(s) based on the operating
system and software configuration of the host.
Mode
140
186
254
280
Level HA Software
None
Optional
Mandatory Veritas Database
Editions/ Advanced
Cluster
Optional Veritas Database
Editions
Optional
Disk Array XP operating system configuration guide: Sun Solaris
Description and Usage
ON: Response to the Inquiry command
is changed, and the volume can be used
from VeritasNetBackUP in heterogeneous
OS configuration, such as HP-UX.
OFF: Normal response to the Inquiry
command.
ON: Mandatory setting when VERITAS
Database Editions/Advanced Cluster is
connected.
OFF: VERITAS Database Editions/
Advanced Cluster should not be connected
with this setting.
Change the response of reserve conflict
status to Read Capacity, Verify, and Start
Stop Unit.
ON: Normal end is reported.
OFF: Reserve conflict status is reported.
HP-UX Ghost LUN Remove OS version:
HP-UX 11.0 and later.
ON: When the host scans the LUNS on the
port, the disk array is not represented in
the device list for HP-UX.
OFF: When the host scans the LUNS on the
port, the disk array is represented in the
device list for HP-UX.
15