Setting The Host Mode And Host Group Mode For The Disk Array Ports - HP XP20000/XP24000 Configuration Manual

Assigning Fibre Channel adapter WWNs to host groups
Mapping volumes (LDEVs) to host groups (by assigning LUNs)
In P9000 or XP Command View Advanced Edition Software, LUN mapping includes:
Configuring ports
Creating storage groups
Mapping volumes and WWN/host access permissions to the storage groups
For details see the HP StorageWorks XP LUN Manager User's Guide. Note the LUNs and their
ports, WWNs, nicknames, and LDEVs for later use in verifying host and device configuration.

Setting the host mode and host group mode for the disk array ports

After the disk array is installed, you must set the host mode for each host group that is configured
on a disk array port to match the host OS. Set the host mode using LUN Manager in XP Remote
Web Console (shown) or P9000 or XP Command View Advanced Edition Software. If these are
not available, the HP service representative can set the host mode using the SVP. The host mode
for AIX is 0F.
102 IBM AIX