Install And Configure The Host; Loading The Os And Software - HP XP1024 System Configuration Manual

Fabric Parameter
ON
OFF
ON
OFF
Install and configure the host
This section explains how to install and configure the host and host bus adapters (HBAs)
that connect the host to the disk array.

Loading the OS and software

Follow the manufacturer's instructions to load the operating system and software onto
the host. Load all OS patches and configuration utilities supported by HP and the HBA
manufacturer.
Connection Parameter
FC-AL
FC-AL
Point-to-Point
Point-to-Point
Disk Array XP operating system configuration guide: Linux
Provides
Not supported
AL-port (private arbitrated
loop; direct connect without
a SAN)
N-port (SAN fabric port)
Not supported
17