Administering QuickLoop
Web Tools
16
Particular ports can be taken in and out of the QuickLoop by the Telnet
commands
qlPortDisable
These modes cannot be configured by Simple Network Management
Note
Protocol (SNMP).
A switch has a default mode, which depends on the switch model. When
powered up, all the ports of the switch are set to the default mode.
You can manage quickloops through Web Tools (an optionally licensed
product), or through Telnet commands.
You can view and modify the QuickLoop settings through the QuickLoop
Admin tab on the Switch Admin interface view, available through Web
Tools. See
Figure
1.
Figure 1. QuickLoop Admin Tab in Web Tools
and
qlPortEnable
QuickLoop User's Guide
.