3. World Wide Name (WWN)
Document feedback
Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and
completeness of this document. However, if you find an error or an omission, or you think that a
topic needs further development, we want to hear from you. Forward your feedback to:
Provide the title and version number of the document and as much detail as possible about your
comment, including the topic heading and page number and your suggestions for improvement.
FICON Administrator's Guide
53-1002753-01
The serial number label on FICON-qualified devices is located as follows:
•
Brocade 5100, 5300, 7800, and 6510 — On the switch ID pull-out tab located inside the
chassis on the port side on the left.
•
Brocade DCX 8510-8 and DCX - On the port side of the chassis, on the lower right side and
directly above the cable management comb.
•
Brocade DCX 8510-4 and DCX-4S - On the nonport side of the chassis, on the lower left
side.
Use the licenseIDShow command to display the switch WWN.
If you cannot use the licenseIDShow command because the switch is inoperable, you can get
the WWN from the same place as the serial number, except for the Brocade DCX. For the
Brocade DCX, access the numbers on the WWN cards by removing the Brocade logo plate at
the top of the nonport side of the chassis.
documentation@brocade.com
xiii