Unbinding Multiple Ports - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

C

Unbinding Multiple Ports

portaddress --bind 12/22 F600
portaddress --bind 12/23 F700
portaddress --bind 12/24 F800
portaddress --bind 12/25 F900
portaddress --bind 12/26 FA00
portaddress --bind 12/27 FB00
portaddress --bind 12/28 FC00
portaddress --bind 12/29 FD00
portaddress --bind 12/30 FE00
portaddress --bind 12/31 FF00
Unbinding Multiple Ports
This section provides example scripts for unbinding all addresses on an 8-slot chassis that is fully
populated with 32 port cards. You can copy these scripts and paste directly into a Telnet Fabric OS
command line session. If a port does not exist, an error message will be reported, but this has no
effect.
for ((i=0;i<32;i++)); do (echo 1/$i;portaddress --unbind 1/$i); done
for ((i=0;i<32;i++)); do (echo 2/$i;portaddress --unbind 2/$i); done
for ((i=0;i<32;i++)); do (echo 3/$i;portaddress --unbind 3/$i); done
for ((i=0;i<32;i++)); do (echo 4/$i;portaddress --unbind 4/$i); done
for ((i=0;i<32;i++)); do (echo 9/$i;portaddress --unbind 9/$i); done
for ((i=0;i<32;i++)); do (echo 10/$i;portaddress -unbind102/$i); done
for ((i=0;i<32;i++)); do (echo 11/$i;portaddress --unbind 11/$i); done
for ((i=0;i<32;i++)); do (echo 12/$i;portaddress --unbind 12/$i); done
100 FICON Administrator's Guide
53-1002753-01