HP StorageWorks XP48 - Disk Array Owner's Manual page 49

The HP SureStore E Disk Array XP48 Hardware
Your HP Service Representative uses the SVP to configure, maintain,
and upgrade your disk array software and hardware. The service
processor also collects performance data on the disk array for
diagnostic testing and analysis.
To protect the user's security, the SVP does not have access to any
user data stored on the disk array.
• control panel
The control panel is your view to the disk array. Once the disk array is
powered on and running normally, there are no user operations
required at the control panel (except in the case of a power failure
recovery). The control panel will be discussed in further detail on
page 51.
• hard disk drives
Your disk array uses 3.5-inch disk drives, and different disk capacities
are available. Ask your HP Service Representative about currently
available disk drives or visit the XP48 website at
www.hp.com/support/xp48. Any of the disk drives in your disk array
frames can be replaced without disrupting user activity. The disk array
automatically detects and corrects disk errors.
• (Optional) one remote console PC
The remote console PC is attached to your disk array by a private local
area network (LAN). The remote console PC runs applications that
allow you to monitor and manage the disk array operations.
49