Note: If you don't know
which setting to use, see
your network administrator
for help configuring the
printer's IP settings.
5. Press
. A checkmark appears next to
OK
selected.
6. Press l to go back, then press d to highlight
7. Press r, then press u or d to choose one of the following IP
configuration settings:
Select this setting if your network uses a DHCP server to
•
AUTO:
provide IP addresses automatically. The printer's IP address will be
obtained from the DHCP server whenever the printer is reset or
turned on.
Select this setting if you would like to configure the
•
PANEL:
printer's IP settings manually.
8. Press
. A checkmark appears next to the setting you selected.
OK
9. Press l to go back, then do one of the following:
If you selected
•
button to exit the printer menu. Then continue with step 14.
If you selected
•
with step 10.
10. Press d to highlight
screen displays the
11. Press u or d to change each octet value, then press r to select the next
octet. When you have changed the value of the last octet, press
LCD screen displays the
12. Press u or d to change each octet value, then press r to select the next
octet. When you have changed the value of the last octet, press
LCD screen displays the
13. Press u or d to change each octet value, then press r to select the next
octet. When you have changed the value of the last octet, press
press the
button to exit the printer menu.
14. Turn the printer off, then back on again.
Setting Up the Printer
as the IP ADDRESS SETTING, press the
AUTO
as the IP ADDRESS SETTING, continue
PANEL
IP, SM, DG SETTING
.
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
29
to show that it's
SHOW
IP ADDRESS SETTING
, then press r. The LCD
.
.
|
29
.
. The
r
. The
r
, then
OK