Epson STYLUS PRO 4900 User Manual page 130

132 | Maintaining and Transporting the Printer
To change the language on the LCD screen, press d to highlight
•
LANGUAGE
want, then press
mode and returns to normal operation.
To change the units of measurement, press d to highlight
•
, then press r. Press d to switch from
UNITS
, then press
FEET/INCH
To change the temperature units of measurement, press d to
•
highlight
TEMPERATURE UNITS
from (Celsius or centigrade) to
C
select it. Press
To change the number of times to perform and auto cleaning, press
•
d to highlight
d to increase or decrease the value (from 1 to 3).
To change the alert settings, press d to highlight
•
, then press r. Press d to choose an item to receive a
ALERT
maintenance alert, then press
To choose whether or not to show remaining cut sheets, press d to
•
highlight
CUT SHEET REMAINING
or , then press
OFF ON
To select the number of minutes to wait until automatically
•
entering sleep mode, press d to highlight
r. Press d to select
to select the setting you want.
OK
To set the amount of idle time required until the printer
•
automatically powered off, press d to highlight
MANAGEMENT
the
POWER OFF TIMER
press r, then press u or d to increase or decrease the value. Press
to select the setting you want.
OK
To return all control panel settings to their default values, press d to
•
highlight
DEFAULT PANEL
Press to restore the default settings.
OK
4. To exit maintenance mode, turn off the printer by pressing the P power
button. Press the P power button again to turn on the printer in the
normal operating mode.
132
, then press r. Press d until you see the language you
to select it. The printer exits maintenance
OK
to select it. Press
OK
F
when done.
l
AUTO CLEANING TIMES
to select it.
OK
to select the setting you want.
OK
, , , , or
5 15 60 120
, then press r. Press r to
, or press d to highlight
, then press r to display
to
METRIC
when done.
l
, then press r. Press d to switch
(Fahrenheit), then press
, then press r. Press u or
MAINTENANCE
, then press r. Press d to select
, then press
SLEEP MODE
, then press
180 MINUTES
POWER
or
DISABLE
TIME TO OFF
EXECUTE.
LENGTH
to
OK
ENABLE
,