Epson STYLUS PRO 4900 User Manual page 156

158 | Solving Problems
Problem
A ruled line on your print
appears to shift.
Color images print in black
only.
The printer continues to feed
paper after you have
cancelled a job.
Roll paper cannot be cut.
Printing is too slow.
Solution
◗ Align the print head as described on page 125.
◗ Run a nozzle check and cleaning cycle; see page 120.
◗ Make sure the Color setting is correct in your printer software.
◗ Press the
Pause/reset button on the printer to clear any print job data
in the printer's buffer and reset the printer.
◗ Make sure the paper source is set correctly.
◗ The paper cutter may be dull. Follow the instructions on page 133 to replace
the cutter.
◗ Make sure
appears on the LCD screen. If not, press the
Source button to select this setting. Also check the Auto Cut settings in your
printer software.
◗ Turn on the High Speed setting. See page 86 for instructions.
◗ Choose a lower resolution in your printer software for faster printing.
◗ Clear space on your hard drive or run a defragmentation utility.
◗ Don't run too many applications at the same time.
◗ Turn off virtual memory.
◗ Add RAM to your system.
◗ Try printing when there is less traffic on the network, or move the printer to a
different network segment.
158
l Paper