Epson STYLUS PRO 4900 User Manual page 149

Message
PAPER SKEW
LOAD PAPER PROPERLY
PAPER SOURCE ERROR
CUT SHEET IS LOADED
REMOVE IT AND CHANGE
PAPER SOURCE TO ROLL
PAPER
PAPER SOURCE ERROR
ROLL PAPER IS LOADED
REMOVE IT AND CHANGE
PAPER SOURCE TO CUT
SHEET
PRINTER COVER OPEN
PLEASE CLOSE THE COVER
REPLACE MAINT BOX 1
AT THE END OF SERVICE
LIFE
REPLACE MAINT BOX 1
REPLACE MAINT BOX 2
TO CONTINUE
BORDERLESS PRINTING,
REPLACE MAINT BOX 2
SPECTROPROOFER ERROR
REFER TO THE MANUAL TO
FIND OUT HOW TO SOLVE
THE PROBLEM
SPECTROPROOFER ERROR
CONNECT CABLE OF
SPECTROPROOFER THEN
RESTART PRINTER
Explanation
Paper is not loaded straight.
The paper source selected in
the printer driver and the
control panel do not match.
The paper source selected in
the printer driver and the
control panel do not match.
The printer cover is open.
The Ink maintenance tank is at
the end of its service life and
needs to be replaced.
The Borderfree maintenance
tank needs to be replaced.
There is an error with the
optional SpectroProofer.
There is an error with the
optional SpectroProofer.
151
Solving Problems
Response
Press the button and make sure the
paper is loaded straight.
Check the Paper Source or Paper Size
settings and make sure the paper is loaded
correctly.
Check the Paper Source or Paper Size
settings and make sure the paper is loaded
correctly.
Close the printer cover.
Replace the Ink maintenance tank. See
page 137.
Replace the Borderfree maintenance tank.
See page 137.
Refer to the SpectroProofer User's Guide
for information.
Turn off the printer and connect the
SpectroProofer's cable. Confirm that the
cable is connected properly, then turn the
printer back on. Refer to the SpectroProfer
User's Guide for additional information.
| 151