Host Group Modes (Options) - HP StorageWorks XP10000 - Disk Array Configuration Manual

CAUTION:
The correct host mode must be set for all new installations (newly connected ports) to Windows hosts.
Do not select a mode other than 2C or 0C. Changing a host mode after the host has been connected
is disruptive and requires the server to be rebooted.
When a new host group is added, additional host group modes (options) may be configured. The
storage administrator must verify if an additional host group mode is required for the host group.
The following host group modes (options) are available for Windows:
Table 3 Host group modes (options)
Host Group
Function
Mode
2
Veritas DBE+RAC Database Edition/Advanced Cluster for Real
(Windows Application Clusters or Veritas Cluster Server 4.0 with I/O fencing
2003 only) is used.
Parameter Setting Failure for TPRLO
When using the Emulex FCA in the Windows environment, the
parameter setting for TPRLO failed. After receiving TPRLO and
6
FCP_CMD, respectively. PRLO will respond when HostMode=0x0C/
0x2C and HostModeOption=0x06. (MAIN Ver.50-03-14-00/00
and later)
CAUTION:
Changing host group modes for ports where servers are already installed and configured is disruptive
and requires the server to be rebooted.
XP Disk Array Configuration Guide for Windows
Default
Inactive
Inactive
11