Setting Surface Controls - Frigidaire PLCF489GC - 40 Inch Dual Fuel Range Use & Care Manual

Burner Cap
Burner Pan
Burner
Base
Electrode
Grate

Setting Surface Controls

Placement of Burner Bases and Caps
Your Cooktop is equipped with three different sizes of burners: Power Burner,
Standard Burner and Simmer Burner.
Place the burner base over each gas opening, matching the burner base size with
the gas opening size. Place the burner cap on each burner base, again matching
the cap size to the burner base size. The cap for each burner has an inner locating
ring which locates the burner cap in the center of the burner.
Make sure each burner cap is properly aligned and level.
Turn the burner on to determine if it will light. If the burner does not light,
contact a Service Center. Do not service the sealed burner yourself.
Gas
Opening
Placement of Burner Grates
Place grate over burner pans. Make sure that the groove under grate fits over
the raised lip of the burner pan. The rounded corners of the grates should be
placed toward the front of the cooktop for the front burners and the rear of the
cooktop for the back burners.
Burner pan
lip
Cooktop
Surface
8