Raid Manager Command Devices; Installation Roadmap; Installing And Configuring The Disk Array; Snmp Configuration - HP StorageWorks P9000 - Disk Arrays Configuration Manual

Figure 1 SNMP configuration
.

RAID Manager command devices

HP StorageWorks P9000 RAID Manager Software manages HP StorageWorks P9000 Business Copy
Software or HP StorageWorks P9000 Continuous Access Synchronous Software operations from a
host server. To use RAID Manager, you must designate at least one LDEV as a command device. This
can be done with Remote Web Console Software or P9000 Command View Advanced Edition Suite
Software. For information about how to designate a command device, see the applicable user guide.
Creating scripts to configure all devices at once may save you considerable time.

Installation roadmap

Perform these actions to install and configure the disk array:
1.

Installing and configuring the disk array

Defining the paths
Setting the host mode and host group mode
Setting the system option modes
Configuring the Fibre Channel ports
2. Installing and configuring the host
Loading the operating system and software
Installing and configuring the FCAs
Clustering and fabric zoning
Fabric zoning and LUN security for multiple operating systems
3. Connecting the disk array
Verifying host recognition of disk array devices
4. Configuring disk array devices
Changing the device parameters
Assigning the new devices to volume groups
Creating the Journaled File Systems
Mounting and verifying the file systems
Installing and configuring the disk array
The HP service representative performs these tasks:
P9000 Configuration Guide: IBM AIX 9