HP StorageWorks P9000 - Disk Arrays Configuration Manual page 24

5. Use the df command to verify that the file systems have successfully automounted after a reboot.
Any file systems that were not automounted can be set to automount using the SMIT Change a
Journaled File System screen.
If you are using HACMP or HAGEO, do not set the file systems to automount.
Example
# df
File system 512-blocks
/dev/hd4
/dev/hd2
/dev/hd9var
/dev/hd3
/dev/hd1
/dev/lv00
/dev/lv01
/dev/lv02 14401536 13949392
HACMP and HAGEO do not provide a complete disaster recovery or backup solution and are
not a replacement for standard disaster recovery planning and backup/recovery methodology.
24 Installing and configuring AIX for the P9000 family of disk arrays
free %Used Iused %Iused Mounted on
8192 3176
1024000 551448
8192 5512
24576 11608
8192 7840
4792320 4602128
4792320 4602128
61% 652 31% /
46% 6997 5% /usr
32% 66 6% /var
52% 38 0% /tmp
4% 17 1% /home
4% 16 1% /hp00
4% 16 1% /hp01
4% 16 1% /hp02