Conventions For Storage Capacity Values; Hp Product Documentation Survey - HP StorageWorks P9000 - Disk Arrays Configuration Manual

http://www.hp.com/storage/spock

Conventions for storage capacity values

HP P9000 storage systems use the following values to calculate physical storage capacity values
(hard disk drives):
1 KB (kilobyte) = 1,000 (10
1 MB (megabyte) = 1,000
1 GB (gigabyte) = 1,000
1 TB (terabyte) = 1,000
1 PB (petabyte) = 1,000
1 EB (exabyte) = 1000
HP P9000 storage systems use the following values to calculate logical storage capacity values (logical
devices):
1 block = 512 bytes
1 KB (kilobyte) = 1,024 (2
1 MB (megabyte) = 1,024
1 GB (gigabyte) = 1,024
1 TB (terabyte) = 1,024
1 PB (petabyte) = 1,024
1 EB (exabyte) = 1024

HP product documentation survey

Are you the person who installs, maintains, or uses this HP storage product? If so, we would like to
know more about your experience using the product documentation. If not, please pass this notice to
the person who is responsible for these activities.
Our goal is to provide you with documentation that makes our storage hardware and software products
easy to install, operate, and maintain. Your feedback is invaluable in letting us know how we can
improve your experience with HP documentation.
Please take 10 minutes to visit the following web site and complete our online survey. This will provide
us with valuable information that we will use to improve your experience in the future.
http://www.hp.com/support/storagedocsurvey
Thank you for your time and your investment in HP storage products.
28 Support and other resources
3
) bytes
2
bytes
3
bytes
4
bytes
5
bytes
6
bytes
10
) bytes
2
bytes
3
bytes
4
bytes
5
bytes
6
bytes