Portcfgtrunkport; Syntax; Availability; Description - HP StorageWorks MSA 2/8 - SAN Switch User Manual

ISL Trunking Commands

portcfgtrunkport

Syntax

This command uses the following syntax:

Availability

This command is available to admin users only.

Description

Use this command to specify a port to be enabled or disabled for trunking.
Note:

Operands

This command has the following operands:
slotnumber - Specify the number of the blade that the port belongs to. This
operand is optional.
portnumber - Specify the port number where you want to enable or disable
trunking. This operand is required.
1|0 - Specify 1 to enable this port for trunking. Specify 0 to disable this port for
trunking. This operand is required.

Example

To enable port 3 on blade 1 for trunking:
50
portcfgtrunkport <[slotnumber/]portnumber [1|0]>
This command requires a Trunking license.
switch:admin> portcfgtrunkport 1/3 1
Committing configuration...done.
ISL Trunking Version 3.1.x/4.1.x User Guide