Table of Contents
Advertisement
For example, if you save 123 as the auto prefix and the
function is turned on, to call 123-7654 just dial 7654.
The prefix 123 is automatically added. The auto prefix is
not added for numbers longer than five digits or to
numbers that start with *.
Auto Retry
When enabled, the Auto Retry function repeats a call
attempt every fifteen seconds for up to three minutes if
the call cannot be delivered through the system.
Tone Send
When enabled, the Tone Send function allows your ter-
minal to send DTMF tones during a call. This allows
operations like electronic banking and other DTMF
tone operated activities. When Tone Send is turned Off,
your terminal does not send DTMF tones.
AccessTone
When enabled, AccessTone sounds three short beeps to
indicate your outgoing call has connected to the system.
Sounds Menu
The SOUNDS Menu contains the following choices for
setting the different volumes and sounds for ringing,
keypad, speaker, and handsfree kits.
Menu Descriptions
SilentMode
When SilentMode is enabled, your terminal does not
make any keypad or ringing sounds in Phone Mode. You
can quickly activate SilentMode by pressing
Ô
Press
, then # again to disable SilentMode. The "S"
icon is shown in the display if Silent Mode is selected
while the phone is in Radio Mode or Phone Mode.
Msg Tone
This feature allows you to turn on or off the tone that
sounds when an incoming text message is received or a
message waiting signal is received.
Key Sound
Key Sound allows you to choose the sound made when
you press keys: a click, a continuous tone, a quick tone
burst, or no sound at all in Phone Mode.
Key Volume
Key Volume allows you to select the volume level of the
sounds made when you press keys in Phone Mode.
Ear Volume
Ear Volume allows you to adjust the volume of the
speaker using the menu setting. You can also adjust the
volume during a call by pressing
the side volume keys in Phone Mode.
Ô
, then #.
Ñ
Ô
or
, or by using
53
Advertisement
Chapters
Table of Contents
