Table of Contents
Advertisement
Receiving Voice Mail During a Call
If your terminal receives a voice mail notice during a
call, a brief tone sounds and Voice Mail Received
is briefly shown in the display.
After you end your call, a number and the voice mail
icon are shown in the display.
Listening to Voice Mail When the Icon Is Shown in the
Display
If there is a number beside the voice mail icon in the dis-
play, you have voice mail messages that you have not
heard. To listen to these voice mail messages:
Ô
Press
Ô
Press
sages.
Press
<(6
Ô
Press
VoiceMsgs1 or VoiceMsgs2.
To access your home-system access number, move
the cursor to VoiceMsgs1 and press
your non-home system access number, move the
cursor to VoiceMsgs2 and press
make a credit card call by pressing and holding
while in Phone Mode if you previously set up the
option.)
Note!
To set up calling cards, refer to the CALL CARDS
Menu section in the Menu Descriptions chapter
to enter Menu Mode.
until the menu pointer is beside Mes-
to open the MESSAGES menu.
until the menu pointer is beside either
<(6
. To access
<(6
. (You can
Storing Your Voice Mail Number
You can store a home-system voice mail access number
and a non-home system access number. It is a good idea
to store your voice mail access number(s) so that a num-
ber automatically displays when you receive a voice mail
notice.
<(6
If you have not stored your voice mail number, enter
it now.
Press
<(6
in Phone Mode or
377
in Radio Mode to
call your selected access number.
Ô
Press
to enter Menu Mode.
Ô
Press
until the menu pointer is beside Mes-
sages.
Press
<(6
to open the MESSAGES Menu.
To store a home-system access number, move the
cursor to VoiceMsgs1 and press
non-home system access number, move the cursor
to VoiceMsgs2 and press
<(6
.
Enter your voice mail phone number on the No:
line.
Press
<(6
. SELECTION STORED! is shown in the
display.
Press
12
twice to exit Menu Mode.
0HVVDJH 6HUYLFHV
<(6
. To store a
Advertisement
Chapters
Table of Contents
