Nikon COOLPIX L100 User Manual page 115

t_ Motion Detection
Press the MENU button ") V (Setup menu) (_ 92) -') _._ Motion detection
Set whether or not the camera automatically increases the shutter speed to
reduce blurring when motion is detected while shooting still pictures.
Auto (default Setting)
When camera detects the movement of the subject or camera shake, the shutter
speed will be increased for reducing the blur.
However, motion detection is not active when the flash mode is set to fill flash.
Note that for some scene modes, motion detection turns off automatically even if
Auto is selected ([_) 38-43).
Motion detection is not active in the following situations:
• When using sport continuous mode (_ 48)
• When using high sensitivity mode ([_]] 50)
• When Continuous is set to Multi-shot 16 (_ 83)
Off
Motion detection is not enabled.
The motion detection setting can be confirmed on the monitor during shooting
(When it is set to Off, nothing is displayed) (_ 21).
When the camera detects shaking and increases shutter speed, the motion
detection indicator turns green.
oo
n
o_
E
Notes on Motion detection
• Blurring caused by camera shake or su_ect movement may not be eliminated if there is excessive
shake or movement.
• Motion detection may not function if the subject exhibits significant movement or is too dark.
• The pictures taken may become somewhat grainy.
103