Nikon COOLPIX S4300 Reference Manual page 83

The Setup Menu
Eye-Fi Upload
MENU
t ab ") Tap V (Setup menu) =)' "_ Eye-Fi upload
n
Notes About Eye-Fi Cards
• Note that images will not be uploaded if signal strength is insufficient even if Enable is selected,
• Select Disable where wireless devices are prohibited.
• Refer to the instruction manual of your Eye Fi card for more information, In the event of
malfunction, contact the card manufacturer,
• The camera can be used to turn Eye Fi cards on and off, but may not support other Eye Fi
functions,
• The camera is not compatible with the endless memory function, When it is set on a computer,
disable the function, If the endless memory function is enabled, the number of pictures taken may
not be displayed correctly,
• Eye Fi cards are for use only in the country of purchase, Observe all local laws concerning wireless
devices,
• Leaving the setting as Enable will result in the battery being depleted in a shorter period of time,
[] Eye-Fi communication indicator
The communication status of the Eye Fi card in the camera can be confirmed on the monitor ((_]6),
• _: Eye-Fi upload is set to Disable,
• _ (lights): Eye Fi upload enabled; waiting to begin upload,
• _ (flashes): Eye Fi upload enabled; uploading data,
• _: Eye Fi upload enabled but no images available for upload,
• _: An error occurred, The camera cannot control the Eye Fi card,
[] Supported Eye-Fi Cards
As of November 2011, the _llowing Eye Fi cards can be used. Be sure that the Eye Fi card firmware
has been updated to the latest version.
• Eye Fi Connect X2 SDHC 4GB
• Eye Fi Mobile X2 SDHC 8GB
• Eye Fi Pro X2 SDHC 8GB
_-B82