Nikon COOLPIX S4300 Reference Manual page 81

P_
m
o
The Setup Menu
Blink Warning
MENU tab -') Tap V (Setup menu) -), _ Blink warning
Specify whether or not the camera detects human subjects that have blinked
when shooting with face detection ([_68) in the following modes.
• I_1 (auto) mode (1_[_38).
• Scene auto selector ([_43), Portrait ([_43), or Night portrait ([_44) is
selected for tile scene mode.
Option
On
Description
When the camera detects that one or more human subjects may
have blinked in an image captured using face detection, the Did
someone blink? screen is displayed in the monitor.
The face of the human subject that may have blinked when the
shutter was released is framed by a yellow border. Should this
occur, check the picture and determine whether or not another
picture should be taken.
See "Operating the Blink Warning Screen" (_'_81) for more
information.
Off (default setting) Blink warning is not enabled.
_1_ Note About BlinkWarning
Tile blink warning does not function at continuous settings of Continuous, BSS, or Multi-shot 16.