Nikon COOLPIX S4300 Reference Manual page 105

n
z
m
&
Troubleshooting
The recorded images
are not displayed in auto
sort mode.
Nikon Transfer 2 does
not start when camera is
connected.
The PictBddge startup
screen is not displayed
when the camera is
connected to a printer.
Images to be printed are
not displayed.
Cannot select paper size
with camera.
Cause/Solution
• The desired image was sorted into a category 72, _9
other than the category currently displayed.
• Images recorded by a camera other than the 75, _60
COOLPIX $4300 and images copied using the
Copy option cannot be displayed in auto sort
mode.
• Images recorded in the internal memory or on
the memory card may not be played back
correctly if overwritten by a computer.
• Up to 999 images or movies in total can be _10
added to each category. If the desired category
already contains 999 images or movies in total,
new images or movies cannot be added.
• Camera is off. 23
• Battery is exhausted. 22
• USB cable is not correctly connected. 76, 79
• Camera is not recognized by the computer.
• Confirm system requirements. 77
• Computer is not set to start Nikon Transfer 2 80
automatically. For more information on
Nikon Transfer 2, refer to help information
contained in ViewNX 2.
With some PictBridge compatible printers, the
PictBridge startup screen may not be displayed and
it may be impossible to print images when Auto is
selected for the Charge by computer option in 90, _78
the setup menu. Set the Charge by computer
option to Off and reconnect the camera to the
stinter.
• Memory card contains no images. Replace the 20
memory card.
• Remove the memory card to print images from 21
the internal memory.
Paper size cannot be selected from the camera in
the following situations, even when printing from a
PictBridge compatible printer. Select paper size
from the printer.
• The printer does not support the paper size _31,
specified by the camera. _32
• The printer automatically selects the paper size.
_712