Nikon COOLPIX S4300 Reference Manual page 31

Connecting the Camera to a Printer (Direct Print)
Connecting the Camera to a Printer
1
Turn off the camera.
2 Turn on the printer.
• Check printer settings.
3 Connect the camera to the printer using the included USB cable.
• Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle,
and do not use force when connecting or disconnecting the plugs.
4
The camera is automatically turned on.
• When properly connected, the PictBridge startup
screen (_1)) will be displayed in the camera monitor,
followed by the image selection screen (%).
(2¸
_1_ If the PictBridge Startup Screen Is not Displayed
Turn the camera off and disconnect the USBcable, Set the Charge by computer opdon (_'_ 78) in
the camera's setup menu to Off, then connect the camera again.
_30