Removing The Battery; Turnk_G On And Off The Camera - Nikon Coolpix S225 User Manual

Removing the Battery
Turn tile camera offand make sure that tile power-on
lamp and tile monitor have gone out before opening
tile battery-chamber/memory card slot cover.
To eject tile battery, open tile battery-chamber/
memory card slot cover and slide tile orange battery
latch in tile direction indicated by tile arrow _. Tile
battery can then be removed by hand _.
• Note that tile battery may become hot during use;
observe due caution when removing tile battery.
Turning On and Off the Camera
To turn on the camera, press the power switch. The
power-on lamp (green) will light for a moment and the
monitor will turn on.
To turn off the camera, press the power switch again.
When the camera is turned
off,
both the power-on
lamp
and monitor will turn off.
If the camera is turned off, hold down the [] button to turn the camera on in
playback mode.
[] Auto Power Off in Shooting Mode (Standby Mode)
If no operations ate per_rmd _t about a minute (default setting), the monitor will turn o#
automadcall!/and the camera will enter standby mode, If no operations are pet_tmed _t another
three minutes, the camera will turn o# automadcall!/(the auto off function),
Pressing the power switch, or the shutter release button, while the monitor is o# in standby mode
will reactivate the monitor,
The time allowed to elapse from he.re the camera enters standby mode can be changed from the
Auto off opdon (_ 122) in d_e setup menu (_ l l 1),
15