Programming The Universal Remote Control - Panasonic CT-27G30CT Operating Instructions Manual

Programming The Universal Remote Control
VCR
Preferred Procedure - Code Known
Programming Universal Remote Using In-
fra-Red Access Codes for VCRs
• Determine brand of VCR.
• Identify code(s) associated with the brand in the
infra-red code index for VCRs.
Procedure
1. Place the remote TV/AUX/CABLE switch into the
AUX position (Center).
2. Place the Remote VCR/LDP switch into the VCR
position (LEFT).
3. Press and hold VCR POWER button down on
Universal Remote.
4. Enter two digit code using keyboard "0 through 9"
buttons. The Universal Remote is now pro-
grammed.
NOTE: Some brands have multiple codes. Repeat
procedure using each code listed until VCR
responds correctly.
Alternate Procedure - Code Unknown
Programming Universal Remote Using the
"Sequence Method" for VCRs
• Confirm VCR is plugged in and operating properly,
then turn OFF.
Procedure
1. Place the Remote TV/AUX/CABLE switch into the
AUX positio n (Center).
2. Place the Remote VCR/LDP switch into the VCR
position (LEFT).
3. Press and hold VCR POWER button down on
Universal Remote.
4. Press VOL RIGHT button repeatedly. Check for the
VCR to turn ON after each press. Stop pressing the
button when the VCR turns ON. The proper infra-
red code has now been accessed.
NOTE:
• It may take several attempts before the correct code
is found.
• The VOL LEFT button can be used to return to a Code
that was accidently passed by.
• Some Remote Controls may have unique operating
functions for some buttons. For Example: The
POWER button may only turn the VCR OFF as
opposed to both ON and OFF. It will then be
necessary to modify the procedure. Turn the VCR
ON and repeatedly press the VOL RIGHT button until
the VCR turns OFF.
Laser Disc Player.
For programming the Universal Remote for Laser Disc
Players use the same procedure as programming
VCR's.
NOTE: Place the Remote VCR/LDP switch into the LDP
position. F'_
Cable Converter Box
Preferred Procedure- Code Known
Programming
Universal Remote
Using
In-
fra-Red Access Codes for Cable Television
Converter Boxes
• Determine brand of Cable Television Converter.
• Identify code(s) associated with the brand in the
infra-red code index for Cable Television Converter
boxes.
Procedure
1. Place the Remote TV/AUX/CABLE switch into the
CABLE position.
2. Press and hold the CABLE POWER button down on
Universal Remote.
3. Enter two digit code using keyboard "0 through 9"
buttons. The Universal Remote is now pro-
grammed. Use the Remote CH UP and DOWN
buttons for selecting Cable Channels.
NOTE: Some brands have multiple codes. Repeat
procedure using each code listed until Cable
Television Converter box responds correctly.
Alternate Procedure- Code Unknown
Programming Universal Remote Using the
"Sequence Method" for Cable Television
Converter Boxes
• Confirm Cable Television Converter box is plugged in
and operating properly, then turn OFF.
Procedure
1. Place the Remote TV/AUX/CABLE switch into the
CABLE position.
2. Press and hold the CABLE POWER button down on
Universal Remote.
3. Press VOL RIGHT button repeatedly. Check for the
Cable Television Converter box to turn ON after
each press. Stop pressing the button when the
Cable Television Converter box turns ON. The prop-
er infra-red code has now been accessed.
NOTE:
• It may take several attempts before the correct code
is found.
• The VOL LEFT button can be used to return to a code
that was accidently passed by.
• Some Remote Controls may have unique operating
functions for some buttons. For Example: The
POWER button may only turn the Cable Television
Converter box OFF as opposed to both ON and OFF.
It will then be necessary to modifythe procedure. Turn
the Cable Television Converter box ON and
repeatedly press the VOL RIGHT button until the
Cable Television Converter box turns OFF.
NOTE: When operating equipment (VCR, Laser Disc Player or Cable Converter box) with the Universal Remote Control,
the TV/AUX/CABLE switch should be set to the same position where the Access Code was first programmed for
the equipment. Otherwise, leave the switch in the TV position. TWAUX./CABLE
- 32 -