Remote Control Battery Installation - Panasonic CT-34WX50 Operating Instructions Manual

Installation
Remote Control Battery Installation
Requires two AA batteries.
1. Turn the Transmitter face down.
Remove top cover by pressing
down on marking and sliding cover
off in the direction indicated.
2.
Install the batteries as shown in
the battery compartment. (Polarity
+ or- must match the markings in
the compartment).
3. Replace the cover and slide in
reverse until the lock snaps.
Two AA siz_
For frequent remote control users, replace old
batteries with Alkaline batteries for longer life.
Ak Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Observe the following precautions:
1. Batteries should always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: "Zinc Carbon" with "Alkaline").
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. Battery replacement is necessary when remote control acts sporadically or stops operating the TV set.
Whenever you remove the batteries, you may
need to reset the remote control infrared
codes. We recommend that you record the code
on page 62, prior to setting up the remote,
9