Table of Contents
Advertisement
Audio Mode (Stereo SAP Mono)
and [TV] Speaker
ACTION
Displays and Exits Menus
Located On Remote Control
(Audio) Mode Stereo/SAP/Mono
When Audio is broadcast in Stereo or SAP an ON
Screen display will appear on initial "Turn On" and
"Channel
Change".
The
available
choices
will
be
indicated in red.
1.
Press the ACTION button to display the Main Menu.
2.
Press the CH DOWN and VOL RIGHT buttons to
select the Audio Icon.
3.
Press the ACTION button to display the Audio
Adjustment Menu.
_
AUDIO
AUDIO NORM
NO
BASS
IIlilltltlttltll
TREBLE
IIItlttlllltlltl
BALANCE
4
MODE
STEREO SAP MONO
SPEAKER
ON
SURROUND
OFF
AI SOUND
ON
Selects or Adjusts
Features When
Menu is Displayed
Selects Desired
Feature When
Menu is Displayed
4.
Press the CH UP or DOWN button to select
"MODE".
5.
Press the VOL LEFT or RIGHT button to select
Stereo, SAP (Second
Audio Programming)
or
Mono. The selected mode will be underlined.
6.
Press the ACTION button twice to exit the Audio
Adjustment Menu.
[TV] Speaker
- This feature is used to turn the
internal speakers "ON" or "OFF". It is used when the
Receiver is connected to an External Audio Amplifier.
(Refer to "To Audio Amp" section for further informa-
tion.)
1.
Press the ACTION button to display the Main Menu.
2.
Press the CH DOWN and VOL RIGHT buttons to
select the Audio Icon.
3.
Press the ACTION button to display the Audio
Adjustment Menu.
_
AUDIO
Helpful
Hints:
STEREO - Two channel Audio reception.
SAP - Second Audio Programming (typically used for
bilingual audio).
MONO - Use when stereo signal is weak.
4.
5.
6.
AUDIO
NORM
NO
BASS
IIIIIiiiiiiiiiii
TREBLE
IIIIIIIIIIIIIIII
BALANCE
MODE
STEREO SAP MONO
SPEAKER
ON
SURROUND
OFF
AI SOUND
ON
k
Press
the
CH
"SPEAKER".
UP
or
DOWN
button
to select
Press the VOL LEFT Or RIGHT button to select
Speaker "ON" or "OFF".
Press the ACTION button twice to exit the Audio
Adjustment Menu.
- 29 -
Advertisement
Table of Contents
