Table of Contents
Advertisement
Auto Program
ACTION
Displays and Exits Menus
Located On Remote Control
Selects or Adjusts
Features When
Menu is Displayed
====
Selects Desired
Feature When
Menu is Displayed
Auto Programming
-This
feature allows you
to place all channels with a video signal into Channel
Scan Memory.
1.
Press the ACTION button to display the Main Menu.
2.
Press the CH DOWN and VOL RIGHT buttons to
select the Set-Up Icon.
3.
Press the ACTION button to display the Set-Up
Menu.
MENU
ICON+TEXT
ON MUTE
NO
SET TIME
:
AM
ANTENNA
CABLE
AUTO PROGRAM
NO
MANUAL PROGRAM
NO
MODE
OFF
FIELD 1
4.
Press the CH DOWN button to select"AUTO PRO-
GRAM".
5.
Press the VOL LEFT or RIGHT button to start Auto
Programming. Channels will automatically advance
until all channels have been scanned.
6.
Press the ACTION button twice after completion of
Auto Programming to exit the Set-Up Menu.
NOTE: Channel numbers with signal present will turn
blue which indicates stored in Channel Scan
Memory.
- 24 -
Advertisement
Table of Contents
