Hdtv Digital Receiver And Ntsc Monitor/Receiver Connection - Panasonic TU-DST52 Operating Instructions Manual

Hdtv digital receiver

Hide thumbs Also See for TU-DST52:

Table of Contents

GETTING

STARTED

HDTV Digital Receiver

and NTSC Monitor/Receiver

connection

Follow this diagram when connecting your HD'I'V Digital Receiver to a NTSC Monitor/Receiver.

Note: Cables not included.

Inc_mlng signal

DOt.BY

ardBnna or

D_^

cable

vQ°v,oEo

INPUT 1INPUT 2

menTALw OUT I_o

_-msc c_T-_oeo 21

TERMINALS ON BACK OF

NTSC MONITOR / RECEIVER

AC IN

HDTV DIGITAL RECEIVER

Procedure

Connect the AN output (VIDEO1 or VIDEO 2) to the,AN Input of the NTSC monitor/receiver.

[]

If your monitor has S-VIDEO input, connect the S-VIDEO output of the HDTV Digital Receiver to the S-VIDEO in of the monitor/

receiver.This connection will give you better video signal.

Select SD format mode on the HDTV Digital Receiver.

Note:

If both Video and S-Video are connected to the monitor, S-VIDEO will override the composite video connection.

12=,

Table of Contents