Table of Contents
Advertisement
FEATURES OF THE
HDTV
DIGITAL RECEIVER
Channel
and Program
Tuning
Channel and program tuning in digital television is very different from current conventional television. In DTV, up to six (6) multiple
programs can exist within a single 6 Mhz channel, These channels behave as sub-channels
within the single channel. When
tuning to a channel, the HDTV Digital Receiver will also tune to a program. The HDTV Digital Receiver will indicate the channel
and program through the on-screen Channel Banner display.
Channel
and program
tuning
The HDTV Digital Receiver allows channel and program selection in the following ways:
[]
Direct tuning (0 ~ 9 keys) - Using the numeric keys on the Remote Control to directly input the Channel number. If necessary use the
PROG button to enter the program number.
[]
Channel Up/Down Tuning (A or •
buttons) - Tunes to the next or previous available channel or program.
[]
Rapid Tuning (R-TUNE) - Switches between the last two channels or programs.
Direct Tuning Method
Follow the procedure below to directly enter the channel number using the Remote Control,
Procedure
[]
Press the numedc keys on the Remote Control to enter the Channel number,
[]
if your channel contains more than one program, press the PROG button and enter the program # (1, 2, 3 etc.) using the numeric
keys.
ChannelBanner
The basic Channel Banner will display channel number, and station identification.
Complete Channel Banner in DTV mode
When you press the INFO button, the complete channel banner is displayed, The channel banner will display channel number,
station identification time or day and ratings information. In addition, the banner will display Add Channel and Delete Channel
buttons.
Channel # and
program #.
--
display
Closed Caption
r
Add Channel
]
Indication
Add or Delete Channel buttons.
Ratings
Indication
Add Channel
or Delete
Channel
feature
This feature lets you delete channels from memory or add channels
to memory.
Procedure
O
Tune the desired channel to be added or deleted,
O
Press the INFO button to display the Channel Banner.
O
Highlight Add Channel or Delete Channel button using 41 or •
C3 Press ACTION button to execute your choice.
Unavailable
Channel
selection
The unavailable
channel
selection
screen is displayed
when you select an unavailable channel.
The following
is a list of some
possible situations
where an unavailable
channel selection
may occur.
[3
Tuning a channel that is not transmitting
any programs
Tuning a channel that stopped broadcasting programs.
[]
The signal strength of the RF signal is insufficient to obtain consistent error free data.
[]
Tuning a channel that is locked
Following
are some of the on-screen
messages
that will be displayed when the above conditions
are encountered,
10e
Advertisement
Table of Contents
